Just like all other equipment used for golf, the golf shoes need to be properly cleaned. Regular cleaning and maintenance allows the shoes to last longer. Proper cleaning procedures need to be observed to ensure that the shape and quality of the shoes are retained.
1.Use a cleat wrench to unscrew the spikes from the golf shoes. Carefully remove each spike in a counterclockwise direction.
2.Clean the holes underneath the shoes to remove the dirt. Use an old toothbrush or a scrub brush to clean the holes. It’s best to clean the holes after playing golf so that dirt won’t become harder to clean. Install the spikes into place by using a cleat wrench in a clockwise motion.
3.Change the spikes two times a year if you play golf once a week. You must change the spikes once a month if you play golf every day. You can change the spikes once they’re missing or worn down.
4.Moisten a clean, white cloth with a mixture of water and mild soap. You can use a gentle laundry detergent as an alternative to mild soap. Clean the upper part of the shoes with the cloth.
5.Moisten another clean, white cloth with water. Use the cloth to wipe off the mild soap from the upper part of the shoes.
6.Make sure not to soak the shoes so that they won’t come apart. The shoes will acquire molds if they’re damp for a long time.
7.Place white paper inside the golf shoes if you accidentally soak them. Don’t forget to remove the insoles of the shoes before inserting the paper. Replace the white paper every after 8-10 hours until the shoes become dry. You can use cedar shoe trees or white cotton towel if you don’t have white paper.
8.Fill the basin with warm water and soak the shoelaces in the water for 30 seconds. Take the shoelaces out of the basin and rub them in soap. Soak the shoelaces in the basin for 30 seconds. Take the shoelaces out of the basin and dry them.
9.You can use baking soda to clean the shoelaces if you don’t have soap. Soak the shoelaces in the basin for 30 seconds after filling the basin with warm water. Take out the shoelaces and sprinkle them with several tablespoons of baking soda. Place the remaining baking soda in the basin. Put the shoelaces in the basin and let them soak for a few minutes. Take out the shoelaces from the basin before drying them.
10.Grab and press onto one end of the shoelaces to dry them.
11.Let the insoles of the shoes be dried at room temperature. You can sprinkle the insoles with baking soda if they have bad odor.
12.Allow the golf shoes to dry at room temperature if you don’t have white paper, white towel, or cedar shoe trees. You can also rotate the shoes instead of letting them dry at room temperature.
13.Never use a heater or blow dryer to quicken the drying process. The shoes won’t retain their original shape if you do this. The outside of the shoes may also become cracked.
14.Use a shoe polish if the upper part of the shoes have scratches. Make sure that the polish has the same color as the shoes. A shoe polish is typically available in three colors: black, white, and brown.
15.Apply waterproof coating on the upper part of the shoes if you want to play golf in wet conditions.
16.Use a shoehorn as you insert your feet into the shoes. The shoes won’t fit properly if you don’t use a shoehorn frequently.
17.Spray Lysol into the shoes if they’re smelly. Avoid spraying on the outside of the shoes.
Use these guidelines when cleaning your shoes yourself. Otherwise, you can always take your golf shoes to professional cleaners.
Just like all other equipment used for golf, the golf shoes need to be properly cleaned. Proper cleaning procedures need to be observed to ensure that the shape and quality of the shoes are retained. Rockbottomgolf gives the best guidelines for cleaning golf shoes.